Direct Button Operation
Changing Volume
You can change the volume by pressing VOL /
on the LCD Monitor or on the remote control unit.
To increase the volume, press • VOL .
To decrease the volume, press • VOL .
Audio status
Output device
Output Select
Fixed Variable
Speaker Variable sound Mute
When “Output Select” is set to “Variable”, the indicator •
on the screen changes as shown below.
See page 27 for details on the Output Select function.•
MUTE
Mutes the current sound output.
Press MUTE.
“• ” will be displayed on the screen for 30 minutes,
and the sound is silenced.
Within 30 minutes of pressing • MUTE, mute can be
canceled by using one of the methods below.
- Mute will be canceled if you press VOL / or
MUTE.
Mute will be canceled after 30 minutes have •
passed. However, the LCD Monitor will not suddenly
output a loud sound as the volume level is set to 0
automatically.
Sleep Timer
Allows you to set a time when the LCD Monitor
automatically switches to standby.
Press SLEEP.
The remaining time displays when the sleep timer has •
been set.
Each time you press • SLEEP, the remaining time
switches as shown below.
When set, the time automatically starts counting down.•
If you want to adjust the sleep timer, you can press •
SLEEP twice then change the time setting.
Five minutes before the time expires, the remaining •
time displays every minute.
Select “Off” by pressing • SLEEP to cancel the sleep
timer.
The LCD Monitor will enter standby when the •
remaining time reaches zero.
When the sleep timer is set, its indicator on the LCD •
Monitor lights red.
