A SERVICE OF

logo

3
Introduction
Note: This fascismile machine is Year 2000 compliant.
*Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode,
excluding time for protocol signals (i.e., ITU-T phase C time only).
Automatic dialling Rapid Key Dialling: 5 numbers
Speed Dialling: 35 numbers
Fax (thermal) paper Initial starter roll (included with machine):
10 m
Recommended replacement roll:
FO-20PRw, 30 m
Paper cutting method FO-50: Tear off by hand
FO-70: Automatic cutter
Modem speed 9600 bps with automatic fallback to lower
speeds.
Transmission time* Approx. 15 seconds
Resolution Horizontal: 8 pels/mm
Vertical:
Standard: 3.85 lines/mm
Fine /Halftone: 7.7 lines/mm
Super fine: 15.4 lines/mm
Automatic document
feeder
5 pages max. (80 g/m
2
paper)
Haftone (grayscale) 64 levels
Display 16-digit LCD display
Welcome, and thank you for
choosing a Sharp facsimile
machine! The features and
specifications of your new Sharp
fax are shown below.
all-Fo50A.book Page 3 Friday, October 1, 1999 5:32 PM