COPYING FROM THE RSPF
27
2
MAKING COPIES
3
Set the originals face up in the document feeder tray.
●
The original size will be indicated in the display, and the paper tray with the
corresponding paper size will be automatically selected.
★KEY OPERATOR The auto paper select function can be disabled using a key operator
program. If this function has been disabled, use the PAPER SELECT key to select the
desired paper tray. See page 15 of the KEY OPERATOR'S GUIDE.
●
To copy onto a different size paper, use the PAPER SELECT key to make the selection.
4
Ensure that the one-sided to one-sided copying mode is selected.
●
When no icon indicating a 2-sided copy mode is displayed, the one-sided to one-sided
copying mode is selected.
5
Set the number of copies and press the START ( ) key.
●
Press the CLEAR (C) key to stop copying in the middle of a run.
Ready to copy.
100%
100%
AUTO
AUTO
8
11
1
2
/
8
11
1
2
/
Ar-M208_sec.book 27 ページ 2002年6月13日 木曜日 午後2時37分