65
USER SETTINGS
5
"Port Configuration" window
To display the "Port Configuration" window, click "Port Configuration" on the "Network Settings" tab.
Port filtering function is also available.
HTTP
Enable/disable an HTTP port.
RAW Print
Enable/disable a 9100 port.
LPD
Enable/disable an LPD port.
IPP
Enable/disable an IPP port.
SNMPD
Enable/disable an SNMP port.
Telnet
Enable/disable a TELNET port.
JCP
Enable/disable a JCP port.
SXUPTP
Enable/disable an SXUPTP port.
2
3
4
5
6
7
1
8
1
2
3
4
5
• JCP is a proprietary protocol developed by
silex technology, Inc. It enables the IP
address of the machine to be set from the
software utility on the accessory CD-ROM.
• SXUPTP is a proprietary protocol
developed by silex technology, Inc. It
enables the scanner function of the
machine to be shared over a network.
6
7
8
Note
