61
Configuring the conference system
Setting the operating mode of the access point
The access point is suitable for stand-alone operation or can be integrated
into a wired SDC
8200 conference and interpretation system (slave mode
operation).
̈ In the main navigation, click “Conference management”.
The “General Conference Settings” overview screen appears.
̈ In the “Select the Operating Mode” box, select the “Stand Alone”,
“SDC
8200” or the “TCS 5500” option button.
̈ Click “Save settings”.
The setting is saved. The access point is set to the desired operating
mode.
The status indicator ^ provides information on the operating mode:
Setting Operating mode of the access point
“Stand Alone“ Stand-alone operation
“SDC 8200“ Integrated operation (slave mode operation)
The WiCOS conference system is integrated into a
wired conference and interpretation system and
operates in slave mode (see
page 73 and the
instruction manual of the SDC 8200 or TCS 5500
system).
“TCS 5500“
Blue LED 1 ... Operating mode of the access point
flashes slowly Integrated operation (slave mode)
lights up Stand-alone operation
