A SERVICE OF

logo

TSXPCX3030
155
Modbus Driver The following table describes the procedure for declaring the cable with a Modbus
driver.
Step Action
1 From the Drivers Manager, select the Modbus Serial Driver tab.
2 Click on the Configuration button.
Result: the Modbus Driver window appears
3 Select from the Serial Port zone, the communication port associated with the
cable. For example COM3 (TSXPCX3030 Cable).
Default Undo Apply
Hide
18
3000
ASCII (7 bits)
RTU (8 bits)
2 bits
1 bit
Stop Bits
Mode (Data Bits)
Parity
Global TimeOut
Inter-Chart TimeOut
Automatic
Even Odd None
COM Port
Baud Rate
COM 3 (TSXPCX3030 Cable)
9600
Setting Up Runtime Debug About
Modbus Driver - Modbus01
Serial Port
ms
ms
FPW
FP