A SERVICE OF

logo

Open as PDF
next previous
The following lens operation can be made with the LENS
button on the side control.
Press the LENS button to enter each lens operation
mode. The selected adjustment display appears on the
screen.
Display Lens shift on the screen. Use the Point ▲▼◄►
buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 60 percent, or
sideways up to 10 percent from the central axis of the
lens shift.
Press and hold the LENS button for more than 5 seconds
to return to the central position.
Lens Shift Adjustment
Note:
 •Thearrowdisappearsatthemaximumlensshiftin
eachdirection.
 •Thearrowsturnredwhenthelensshiftcomestothe
centerpositionofthescreen.
Display Zoom on the screen. Use the Point ▲▼ buttons
to zoom in and out the image.
Zoom Adjustment
Display Focus on the screen. Use the Point ▲▼ buttons
to adjust focus of the image.
Focus Adjustment
Lens Operation
Zoom → Focus → Lens Shift → ……
Basic Operation
Shutter Function
Shutter function allows you to completely block out light
to the screen. Press the SHUTTER button to close the
shutter inside the projector. To open up the shutter,
press the SHUTTER button again. Refer to p.63 for
details of setting for the Shutter function.
Note:
•TheSHUTTERbuttononthesidecontrolandthe
remotecontrolcannotbeeffectivewhenShutter
ProtectionisOn intheSettingmenu.(p.63)
•TheSHUTTERindicatorontheprojector'stoplights
bluewhentheshutterisclosed.(pp.12,79)
•Theprojectorwillshutdownautomaticallywhenthe
settimeonshuttermanagementhaspassed.(p.63)
•ThePowermanagementfunctiondoesnotwork
whentheshutterisclosed.(p.59)
Operating with Projector Control
Side Control
Zoom
SHUTTER button
LENS button
POINT buttons
Focus
Lens shift
27