31
Computer Input
Store
To store the adjusted data, select Store and then press the
Point or the SELECT button. Move the highlight to one
of the Modes 1 to 10 in which you want to store, and then
press the SELECT button.
Mode free
To clear the stored data, select Mode free and then press
the Point or the SELECT button. Move the highlight to the
Mode that you want to clear and then press the SELECT
button.
✔Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the
PC System Menu (p.28).
• When input computer signal to the projector, PC adjust will become available.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
This Mode has stored
parameters.
Auto PC adj.
Fine sync
Total dots 1365
Horiznotal 0
Vertical 0
Current mode
Clamp 0
Display area H 1024
Display area V 768
Reset
Mode free
Store
0
►
►
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
0
0
Total dots 1344
Horizontal 255
Vertical 34
Display area H 1024
Display area V 768
Where to free?
►
Values of Total dots, Horizontal,
Vertical, Display area H, and
Display area V.
store?
Store
Total dots
Position H
Position V
Display area H
Display area V
0
0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10
Free
0
0
Total dots 1344
Horizontal 255
Vertical 34
Display area H 1024
Display area V 768
Where to store?
►
Vacant
Press SELECT button to
store the data.
Press MENU button
to close this dialog
box.
Mode free
Store
