Part Names and Functions
Side Control and Indicators
①ON/STAND-BY button
Turn the projector on or off (pp.
23–24
).
③MENU button
Open or close the On-Screen Menu (p.25).
④Point
▲▼◄►
buttons
– Select an item or adjust the value in the
On-Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.
44
).
⑫WARNING TEMP. indicator
Blink red when the internal temperature of the
projector exceeds the operating range (pp.
77,
85-87
).
⑤
SHUTTER button
Close and open up the built-in shutter. (p.
27
)
⑧POWER indicator
– Light when in stand-by mode and during
operations.
– Blink in the Power management mode (p.
63
).
⑥SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.
44
).
⑨LAMP/
SHUTTER
indicator
Light red during operations.
Light blue when the shutter is closed (p.
85
).
⑩LAMP REPLACE indicator
Light orange when the projection lamp reaches
its end of life (pp.
74, 84
).
⑪WARNING FILTER indicator
– Blink slow when the filter is being scrolled (pp.
71, 85).
– Blink fast when the filter scroll is not working
properly or the filter cartridge is not installed
(pp.
71, 87
).
– Light orange when the clogging of the filter is
detected or the filter counter reaches a time
set in the timer setting, urging immediate filter/
filter cartridge replacement (pp.
70, 71, 87
).
Side Control Indicators (on the top panel)
②INPUT button
Select an input source (pp.
32–34
).
⑦LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.27).
⑥
⑤
⑦
①
②
④
③
⑨
⑧
⑩
⑪
⑫
