English -6 -
After Automatic Search process is completed, the
following message asking for analogue channel search
appears on the screen. TV switches to the analogue
TVmode.
Yes
Do you want to search for
analogue channels?
No
To seach for analogue channels, select “Yes”. The
menubelowis displayedto searchfor analoguechan-
nels.
AUTO PROGRAM
Country Germany
Select your Language, Country and Text language by
using
/
and
/
buttons. Press “OK” buttonto
continue. To cancel, press “BLUE” button.
For more information on this process, see “Install
Menu” section.
Note: For proper functioning of digital teletext in DTV
mode, you should set country as UK in ana-
logue AUTO PROGRAM.
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the buttons on the TV
VolumeSetting
• Press “ -” button to decrease volume or “ +”
button to increase volume, so a volume level scale
(slider) will be displayed at the middle of the bottom
on the screen.
Programme Selection
• Press “P/CH +” button to select the next programme
or“P/CH-”buttontoselectthepreviousprogramme.
EnteringMainMenu
• Press the “MENU” button to enter Main menu. In the
Mainmenuselectsub-menu using“P/CH-”or“P/CH
+” buttons and enter the sub-menu using “
-” or
“
+” buttons. To learn the usage of the menus,
refer to the Menu System sections.
AVMode
Press the “
AV
” button at the control panel on the the
TV to switch your TV to AV modes.
Operation with Remote Control
The remote control of your TV is designed to control
all the functions of the model you selected. The func-
tions will be described in accordance with the menu
system of your TV.
Functions of the menu system are described in the
following sections.
VolumeSetting
Press “ V +“ button to increase volume. Press “V -”
button to decrease volume. A volume level scale
(slider) willbe displayed in the middle at the bottom of
the screen.
Programme Selection (Previous or next
programme)
• Press “P-” button to select the previous programme.
• Press “P+” button to select the next programme.
Programme Selection (direct access):
Press digit buttons on the remote control to select
programmes between 0 and 9. TV will switch to the
selected programme. To select programmes between
10 - 999 (for IDTV) or 10-99 (for analogue), press the
digit buttons consecutively which programme you
want to select (eg. for programme 27, first press 2
and then 7). When it is late to press second digit
buttononly the first digit programme will be displayed.
The limit of the delay time is 3 seconds.
01-ENG-42781W-MB26-UKIDTV-BSI-1050UK-(WSUB-ALO-ECOPIP)-SANYO-C2-10050046-50110543.p6510.07.2007, 12:536
