58 - Samsung Napster YP-910 Player Samsung Napster YP-910 Player - 59
Settings
Rpt/Shuffle - Repeat One
EQ - Rock
Record Settings
Backlight - 1 sec
Contrast - 3
Reset
About
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to
select Settings, and then press the SELECT button.
1
Use the SCROLL UP/SCROLL DOWN buttons to select EQ.
2
Press the SELECT button until the desired mode appears.
●
Select the desired mode, and then press the MENU button to go to the main menu.
Off ➔ Rock ➔ Pop ➔ Classical ➔ Jazz ➔ Bass Boost
3
Equalizer Settings
Recording Settings
Sampling Rate - 44 Khz
Bit Rate - 128 Kbps
Monitor Volume - On
Settings
Now Playing
Library
FM Radio
Settings
FM Transmitter
Menu
Rpt/Shuffle - Repeat One
EQ - Rock
Record Settings
Backlight - 1 sec
Contrast - 3
Reset
About
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select
Settings, and then press the SELECT button.
1
Use the SCROLL UP/SCROLL DOWN buttons to select Record
Settings, and the press the SELECT button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Sampling Rate, Bit Rate, and Input
Level, and then briefly press the SELECT button to make the desired recording setting.
●
Complete the desired setting, and then press the MENU button to go to the main menu.
● Sampling Rate: Each time the SELECT button is pressed, the selection toggles
between 32KHz and 44KHz.
● Bit Rate: Each time the SELECT button is pressed, the selection changes as follows:
96
➔ 128 ➔ 160Kbps.
● Monitor Volume:
Each time the SELECT button is pressed, the selection toggles
between On and Mute.
3
Recording Settings
910-eng-new 9/26/03 3:03 PM Page 58
