7978
To... Then press the...
Change the length
key (t
he length
of a note will be changed each
time you press the key)
.
Listen to your melody Listen soft key.
Cancel your changes key.
3. When you are satisfied with your melody, press
the Yes soft key.
4. Enter a title for the melody.
N o t e: For further details on how to enter
characters, refer to page 42.
You are asked if the melody is to become the ring
tone.
4. To use the melody as the ring tone, press the Yes
soft key.
The melody is saved and is played each time your
phone rings. You can also select the melodies
composed, via the Ring Tone menu option (4-1).
Deleting a Melody
1. Select the melody that you wish to delete.
2. Press and hold the key for a few seconds.
All notes are erased.
3. Press the Listen soft key.
You are asked to confirm that you wish to delete
the melody by pressing the Yes soft key.
T o n e s T o n e s
Ring Volume Menu 4-3
This option allows you to adjust the ringing volume
to one of seven levels.
Use the volume keys on the left side of the phone or
the navigation keys. The greater the number of bars,
the greater the volume.
Alert Type Menu 4-4
This option allows you to indicate how you are to be
i n f o rmed of any incoming calls. The following options
a r e available.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringing tone
selected via the Ring Tone menu option (4-1).
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone both rings and vibrates.
N o t e : In idle mode, you can set the phone to vibrate
only (silent mode) or to start ringing again,
simply by holding down the k e y.
08-N300-Voice/Tones 5/26/01 9:04 AM Page 78
