Changing Your Settings 156
3.
Open the QWERTY keypad and enter a word or short phrase (up
to 18 characters) to display on your phone’s screen while in
Standby mode. (For more information, refer to “Entering Text”
on page 33.)
Note:
If necessary, press and hold the key to erase an existing banner.
4. To save the new banner, tap
Save
.
Backlight
You can set the backlight for your display or keypad to remain on or
off or to remain on for a specified period of time.
Note:
Prolonged backlight use drains your battery faster.
1. In Standby mode, tap Menu ➔ Settings ➔ Display Settings.
2. Tap Backlight. The following sub-menus display on the
screen:
•
Backlight Time
: Sets the amount of time the main display backlight
remains on with the phone idle. Optional settings are
7
,
15
, and
30
Seconds;
Always On
(this setting uses much more power than the
timed settings); and
Always Off
.
•
Brightness
: Slide your finger across the touch screen between any of 5
optional settings (1 – 5).
3. Tap the desired option to launch its sub-menu and tap settings
as desired.
