A SERVICE OF

logo

Open as PDF
next previous
Section 1
Getting Started 13
To Install The Battery Cover:
1. Place the cover over the back of the phone so
the hinges align with the slots near the top
of the phone.
2. Push on the cover while sliding it up towards
the top of the phone, inserting the hinges into the slots.
3. Press down on the cover around all sides ensuring the cover snaps into
place.
To Remove The Battery:
1. If the phone is on, turn it off by opening your Jitterbug and holding down the
on
off
button until the GreatCall logo appears. The phone will then turn off.