170 Section 2J: Using the Built-in Camera and Camcorder
Setting Picture Mode
To set the picture mode:
1. From camera mode, press Options ().
2. Select Settings ( ).
3. Highlight View Mode and press .
4. Press the navigation key up or down to highlight
Wide Screen or Full Screen and press .
Setting the Flash
To activate the flash:
1. From camera mode, press Options ().
2. Select Flash ()
.
3. Select one of the following options and press
.
Ⅲ Off to deactivate the flash.
Ⅲ On This Shot to activate the flash for one shot.
Ⅲ Always On to activate the flash for all pictures.
Setting the Self-Timer
To activate the Self-Timer:
1. From camera mode, press Options ().
2. Select Self-Timer ().
3. Press the navigation key up or down to select the
desired length of delay (Off, 5 Seconds, 10 Seconds) and
press
.
4. Select Capture ( ) when you are ready to start the
timer.
