Briefly press the Last Memory/SBS button to activate the SBS function
or hold it longer to activate the Last Memory function.
SBS/Last Memory function
1615
ESP/Album function
Press the +10 button.
•
Press the +10 button briefly while playing
back a CD. Playback will skip 10 tracks.
Example : If you want to select track 43 during playback of track 15, press the +10
button three times, and then press the button three times.
•
MP3-CD playback
: Press and hold the ESP/Albm button longer to select “Album
Off”. The button is now enabled as the +10 button.
Main Unit
ESP prevents the music being interrupted by
vibration and shock.
ESP (Electronic Skip Protection) function
Press the ESP/Album button.
•
CD Playback: Press the ESP/Album
button to turn this function on and off.
(During playback of an MP3-CD,
ESP will always be active whether or
not the ESP/Album button is pressed.)
•
The player buffers up to 120 seconds of MP3 and 45 seconds of audio CD data; hence even if the
data flow is interrupted, data is read from memory so that the sound signal remains undisturbed.
•
While listening to music, the Anti-S.T (Anti-Shock Time) Buffer Level is automatically
saved.
+10 button
SBS
(Super Bass Sound)
function
Press the SBS button.
•
Each time the SBS button is pressed,
SBS will be turned on and off alternately.
This function allows you to maximise
your listening enjoyment with dynamic
reproduction of low-pitched sounds such
as beating drums or galloping horses.
Last Memory function
When MP3-CD playback is
selected again after your
CD player has been stopped or
turned off, this function allows
playback from the start of the
track that you last listened to.
•
Press and hold the Last Memory button.
Each time the button is pressed and held,
the selection switches between
“On Last.M” and “Off Last.M”.
*This function is only available during
playback of an MP3-CD.
MCD-SM45(GB) 2/25/04 8:29 AM Page 16
