- English
Settings
Lets you set the colour space format for the HDMI
output to match the capabilities of the connected
device (TV, monitor, etc).
Lets you set the product to output video from the
HDMI OUT jack with Deep Colour. Deep Colour
provides more accurate colour reproduction with
greater colour depth.
Lets you improve picture quality when viewing DVDs.
Lets you adjust the following speaker settings and
turn the test tone on and off so you can test the
speakers.
: Lets you adjust the relative loudness of
each speaker from 6dB to -6dB. For example,
if you like deep bass, you can increase the
loudness of the subwoofer by 6dB.
: Lets you adjust the relative distance
of each speaker from the listening position
up to 9 meters. The farther the distance, the
louder the speaker will be.
: Lets you run the function
so you can test your adjustments. Setting
to turns the on. Setting it to
turns it off.
Lets you select which speakers you want active,
either the TV's speakers or the home cinema's
speakers.
Lets you direct the sound from the TV to the
Home Cinema speakers. Requires an HDMI
connection and an (ARC)
compatible TV.
If is set to on and you are
using an HDMI cable to connect the product to
the TV, digital optical input will not work.
If is set to and
you are using an HDMI cable to connect the
product to the TV, ARC or digital optical input is
selected automatically.
Lets you set the to match the
capabilities of the AV receiver you’ve connected to
the product. For more details, please refer to the
digital output selection table. (See page 45)
Lets you apply dynamic range control to Dolby
Digital, Dolby Digital Plus, and Dolby TrueHD
audio.
: Automatically controls the dynamic range
of Dolby TrueHD audio, based on information
in the Dolby TrueHD soundtrack. Also turns
dynamic range control off for Dolby Digital and
Dolby Digital Plus.
: Leaves the dynamic range uncompressed,
letting you hear the original sound.
: Turns dynamic range control on for all three
Dolby formats. Quieter sounds are made louder
and the volume of loud sounds is reduced.
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the product
downmix to or to
.
When the product is attached to a digital TV, lets
you adjust the audio delay so that the audio syncs
with the video. You can set the delay between 0
and 300 milliseconds.
Lets you configure the network connection so
you can enjoy various features such as Internet
services or DLNA Wi-Fi functionality, and perform
software upgrades.
Lets you test the Internet Protocol setup to see if
it is working correctly.
Lets you check the current network and Internet
status.
