›
Receive data using the Bluetooth wireless
feature
In Idle mode, open the application list and select
1
Settings
→
Wireless and network
→
Bluetooth settings
→
Visible.
Your device is visible to other Bluetooth devices for
specified period.
You can set the duration that your device is visible to other
Bluetooth devices by selecting Visible time-out.
When prompted, enter the PIN for the Bluetooth wireless
2
feature and select OK (if necessary).
Select
3
Accept to confirm that you are willing to receive
data from the device.
Received data is saved to the bluetooth folder. If you receive a
contact, it is automatically saved to the phonebook.
Wi-Fi
Learn to use your device’s wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses non-harmonised frequency and is
intended for use in all European countries. The Wi-Fi can
be operated in the EU without restriction indoors, but
cannot be operated outdoors in France.
