
Phone Settings
88
Auto Light
(Menu 4.7.3)
Using this feature, you can specify the time for
which the backlight is to be used. This feature helps
you to conserve your battery power.
The following options are available:
Disable
: the backlight is used according to the
setting in the
Back Light
menu option
(
Menu 4.7.2
); see page 87.
Enable
: the backlight is used only during the
specified period of time. Set the time when the
phone turns the light on and then turn it off, using
the appropriate number keys.
Service Light
(Menu 4.7.4)
This option allows you to select whether or not the
service light is used or in which color it flashes.
Select one from the seven color settings available.
When the phone is ready for use, the service light
flashes in the appropriate color.
If you do not want to use the service light,
select
Off
.
Graphic Logo
(Menu 4.7.5)
This option allows you to display your operator’s
logo instead of its name.
Off
: the operator name displays in Idle Mode.
On
: the operator logo stored in your phone displays
in Idle Mode; if no logo has been stored, the
operator name displays.
Phone Settings
89
Extra Settings
(Menu 4.8)
You can turn the automatic redialing or answering
features on or off.
The following options are available:
Auto Redial
: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
Note
: The interval between two call attempts varies.
Open to Answer
: when this option is checked,
you can simply open the folder to answer a call.
When it is unchecked, you must open the folder and
press a key, depending on the setting of the
Anykey Answer
option. See below.
Anykey Answer
: when this option is checked,
you can answer an incoming call by pressing any
key, except the key and the
Reject
soft key.
To reject the call, press the key or the
Reject
soft key.
When this option is unchecked, you can only press
the key or
Accept
soft key.
To turn a feature Press the
on
ON
soft key.
A check mark displays in
front of the option.
off
OFF
soft key.
The check mark no longer
displays.