System Setup
English - 22
6. Auto Channel scan will be started.
• The number of stations automatically stored by the DVD Recorder depends
on the number of stations that it has found.
7. Check the date and time.
• if it is : Correct, press the OK button then the date and time will be saved.
If you don't press the OK button, the date and time will be saved
automatically after 5 seconds.
• if it is : Incorrect, input correct Time, Date, Year using
▲▼◄ ►
buttons or
number buttons. Press the OK button then the date and time will be saved.
When you need to change clock setting, you can set up it manually.
Now, DVD Recorder is ready for use. Function for “Plug & Auto Setup” is
xed already. So if you want to change this xed one, you can change
it by Presetting the Stations in OSD “Presetting Channels with the
Manual setup function” menu. (see page 23)
Setting the Clock
This menu is used to set the current time.
You need to set the time to use timer recording.
1. With the DVD Recorder in Stop mode/No Disc mode, press the MENU
button.
2. Press the
▲▼
buttons to select Setup, then press the OK or
►
button.
3. Press the
▲▼
buttons to select Clock Set, then press the OK or
►
button.
Use the
▲▼◄ ►
buttons to input Time, Date or Year. Use number buttons
to input clock data directly.
4. Press the OK button, then the date and time will be saved.
If you don’t press the OK button, it will not be saved.
■
17%
Auto Channel Memory
Stop
Auto Setup
DVD-Recorder
No Disc
MOVE
OK
RETURN
Date Time
MON
JAN 01 2007 12 00
Clock SetDVD-Recorder
Date Time
MON
JAN 01 2007 12 00
Programme
Setup
No Disc
MOVE OK RETURN EXIT
01274J-R150,155-AFR-ENG.indb 2201274J-R150,155-AFR-ENG.indb 22 2007-04-20 오후 2:27:492007-04-20 오후 2:27:49
