Peaking
Peaking improves the contours in a projected image. Highlight PEAKING
by pushing the control disc up or down and press ENTER to toggle the
peaking between OFF and ON. During the creation of new settings for a
RGB source the peaking is switched to OFF.
Color Select
Highlight COLOR SELECT by pushing the control disc up or down and
press ENTER to display the color select menu.
Use the control disc to highlight a color (CRT) or combination of colors to
display the projected image in that specific color.
To select a new color, press ENTER, the color selection menu appears.
Clamp Tuning
Highlight CLAMP TUNING by pushing the control stick forward or back-
ward and press ENTER to toggle between NORMAL and RESTORATION.
Select Normal :
- for all standard sources and all sources with a bac porch > 0.8ms,
- for sources with noise and spikes in the signal.
Select Restoration
- for standard sources with a backporch between 0.4 ms and 0.8 ms,
- for sources with sync separate or sync on Green.
Port 2 : Video or S-Video
Port 2 can be used as a Video or S-Video input.
Highlight Port2 by pushing the control stick forward or backward and
press ENTER to toggle between VIDEO and S-VIDEO.
6-4
Random Access Adjustment Mode
<EXIT> to return.
<EXIT> to return.
<EXIT> to return.
ENTER continues to the color select menu.
Pattern Selection Menu.
ADJUST returns to operational mode.
ENTER continues to the color select menu.
Pattern Selection Menu.
ADJUST returns to operational mode.
to return.
to return.
