34
Runco CL-610 Owner’s Operating Manual
Aspect Ratio
To access the Aspect Ratio adjustments, press Menu, then press the ▲ or ▼ arrows
to highlight Aspect Ratio and press Enter. The Aspect Ratio sub-menu then appears
(see above).
There are six aspect ratios available that can be selected for video signal inputs:
Aspect Ratio
Anamorphic (16:9)
Standard (4:3)
Letterbox
Virtual Wide
Cinema
Virtual Cinema
Runco CL-610
> Video
S-Video
Component1
Component2
RGB-HD
HDMI
------------------------
Aspect Ratio
Installation
Option
Setup
ISF Calibration
• ANAMORPHIC (16:9)
The image is compressed vertically,
but anamorphic software will appear
properly proportioned. This is best
suited for use with 16:9 DVDs and HDTV
programming.
• STANDARD (4 x 3)
The input signal is scaled to fit in the
center of the 16:9 screen.
• LETTERBOX
The image in the Letterbox mode is
stretched vertically, and the top and
bottom portion ‘blanked off’. This ratio
is best suited for LaserDisc movies or
non-anamorphic DVDs.
• VIRTUALWIDE
A 4:3 image is transformed into a 16x9
image.
On-Screen Display Menus
