26
TUNER OPERATION
TUNING A STATION MANUALLY
1. Press POWER
1
.
2. Repeatedly press
FUNCTION until the frequency band (AM or
FM) appears on the player.
3. Press
BAND or STOP to select the desired band (AM or FM).
4. Press
TUNING or to tune in the desired station.
STEREO AND MONO TUNING
To listen in stereo, press FM MODE until STEREO appears.
To listen in mono, press
FM MODE until MONO appears. Background
noise is reduced but the signal reproduced is mono.
Note: Only the left/right front speakers and subwoofer are used for
mono.
TUNING A STATION AUTOMATICALLY
Hold down TUNING or briefly to tune to a station
automatically. The player stops searching when it receives a strong
signal. The search may not stop at a station with a very weak signal.
PRESETTING STATIONS
You can tune directly to a stored station by entering the preset
number. You can preset up to 20 FM and 20 AM stations.
1. Press
POWER
1
.
2. Repeatedly press
FUNCTION until the frequency band appears
on the display.
3. Press
BAND to select the desired band.
4. Press
TUNING or to tune to the desired station.
5. Press
MEMORY.
6. Repeatedly press
NEXT or PREV to select the preset
number and press
MEMORY to store the station.
7. Repeat steps 3-6 to store other stations.
TUNING TO A PRESET STATION
1. Press POWER
1
.
2. Repeatedly press
FUNCTION until the frequency band appears
on the display.
3. Repeatedly press
BAND to select the desired band.
4. Press
NEXT or PREV to select the preset station, or use
the numbered buttons to enter the number of the desired preset
station.
Example: To select preset number 15, press
+10 and 5. To select
preset number 10, press
+10 and 0.
31-5025.fm Page 26 Wednesday, January 15, 2003 5:05 PM
