16
3.5.3.4 Press ”
MENU
”
to exit and confirm current operation.
3.5.3.5 Press ”
MENU
” again to exit and close
SYSTEM
setup mode.
3.5.4 MOTION AUDIBLE ALARM
To set the MOTION AUDIBLE ALARM. It will be trigged by motion detection occurrence
when the setting is ON.
3.5.5 ALARM DURATION Setup option:
This device allows user to set the ALARM DURATION. Reaction time was determined
by how long the alarm mode responded to a buzzer.
3.5.5.1 Press ”
Up
” or “
Down
”
to choose
ALARM DURATION setup.
3.5.5.2 Press ”
ENTER
” to confirm ALARM DURATION setup.
3.5.5.3 Press ”
Up
” or “
Down
” to choose ALARM DURATION setup
10 SEC, 15 SEC, 20 SEC, 30 SEC, 1MIN, 2MIN, 3 MIN, 5 MIN, 10 MIN, 15 MIN,
30 MIN, ALWAYS.
3.5.5.4 Press ”
MENU
”
to exit and confirm current operation.
3.5.5.5 Press ”
MENU
” again to exit and close
SYSTEM
setup mode.
3.5.6 DWELL TIME setup
This device allows user to set the DWELL TIME. DWELL TIME is the lasting time that
each channel sequentially shown on monitor.
3.5.6.1 Press ”
Up
” or “
Down
”
to choose
DWELL TIME setup.
3.5.6.2 Press ”
ENTER
” to confirm DWELL TIME setup.
3.5.6.3 Press ”
Up
” or “
Down
” to choose DWELL TIME setup.
01~10 SEC.
3.5.6.4 Press ”
MENU
” to exit and confirm current operation.
3.5.6.5 Press ”
MENU
” again to exit and close
SYSTEM
setup mode.
3.5.7 MESSAGE LATCH setup
This device allows user to decide the Ex External Alarm graph video loss graph
showed on monitor or not.
3.5.7.1 Press ”
Up
” or “
Down
”
to choose
MESSAGE LATCH setup
3.5.7.2 Press ”
ENTER
” button to confirm MESSAGE LATCH setup
3.6.7.3 Press ”
Up
” or “
Down
”
to choose the MESSAGE LATCH : ON/OFF
ON : Message latch ON
OFF : Message latch OFF
3.6.7.4 Press ”
MENU
”
to exit and confirm current operation.
3.6.7.5 Press ”
MENU
” again to exit and close
SYSTEM
setup mode.
3.5.8 TITLE DISPLAY setup
