18
CMX 2000V
Stereo Mode (both channels driven)
8Ω / FTC 20 Hz - 20 kHz / 0.1% THD
8Ω / EIA 1 KHZ / 0.1% THD
4Ω / FTC 20 HZ - 20 KHZ / 0.1% THD
4Ω / EIA 1 KHZ / 1% THD
2Ω / EIA 1 KHZ / 1% THD
70 V - Direct drive / EIA 1 kHz / 1% THD
100 V - Direct drive / EIA 1 kHz / 1% THD
1050 W
1100 W
1600 W
2000 W
2500 W
2500 W
1000 W
Bridge Mono Mode
8Ω / FTC 20 Hz - 20 kHz / 0.1%THD
8Ω / EIA 1 kHz / 0.1%THD
4Ω / EIA 1 kHz / 1%THD
140 V - Direct drive / EIA 1 kHz / 1% THD
100 V - Direct drive / EIA 1 kHz / 1% THD
3200 W
3600 W
5000 W
5000 W
3600 W
Distortion (SMPTE-IM) < 0.01%
Signal to Noise (20 Hz – 20 kHz) 8Ω > -100 dB
Input Sensitivity 8Ω 1.42 V (+5.3 dBu)
Voltage Gain (8Ω) 36 dB
Output Circuitry 3-tier Class H
Power Requirements
Typical, 1/8 power, pink noise at 4Ω
120 VAC
230 VAC
Severe, 1/3 power pink noise at 4Ω
120 VAC
230 VAC
13.9 A
7 A
26.9 A
13.5 A
Frequency Response 20 Hz – 20 kHz, +/- 1 dB dB -3 dB points: 5 Hz and 50 kHz (LF filter bypassed / 8Ω)
Damping Factor > 300 at 8Ω
Input Impedance (Ω) 10 kΩ unbalanced / 20 kΩ balanced
Input Clipping 6.4 Vrms (+18 dBu)
Cooling Continuously variable speed fan, back-to-front air flow
Connectors (each channel) Input: Active balanced; barrier strip, XLR and 1/4" (6.3 mm) - TRS tip and XLR
(pin 2 positive)
Output: Detachable terminal block and Speakon™
Controls Front: AC Switch, Channel 1 and Channel 2 gain knobs
Rear: 10-position DIP switch
Indicators Power-on: Green LED / Signal: Green LED (1 per channel) / Clip: Red LED
(1 per channel)
Amplifier Protection Stable into reactive or mismatched loads
Load Protection On/off muting, triac crowbar on each channel
Dimensions (HWD) 5.25" (3RU) x 19" x 15.9" (133 mm x 483 mm x 400 mm)
Weight - Net / Shipping 75 lb (34 kg) / 87 lb (39.5 kg)
Specifications
Specifications subject to change without notice.
