16 Using the Printer with Windows
Driver Installation
Start Windows.
Insert the printer driver CD-R (for Win 95/98/Me/2000 or
NT) into your CD-ROM drive.
For Windows 95/NT4.0:
- Click the Start button.
- Select Settings, then Printers
- Double click the Add Printer icon. Click Next
- Specify the Network or Local button and click the
Next button.
- Select Have Disk, enter the CD-ROM drive and path,
e.g. D:\Cyclone Drivers.
- The driver name Label Dr. 200 will appear in the
List of Printers. Click Next.
- Select your desired operating system, e.g. WIN98.
Click OK.
- Click OK again if necessary.
- Select the communication port for the label printer. For
select "LPT1:", "LPT2:" or "LPT3", for serial port select
"COM1:" or "COM2:".
- After the related files have been copied to your system,
the procedure is complete.
- If you need to print from the label printer you should
set "Label Dr. 200" as the Default Printer.
Note:
If you are just updating your driver, make sure to delete the previous
version first.
B. HOW TO USE THE DRIVER
After the driver is installed, you can open the Label Dr. 200
dialogue box and make parameter settings through the same
paths as mentioned above:
1. Windows 95/NT4.0 - Start > Settings > Printers > Label Dr.
> Properties
510172_r1.qxd 3/21/2001 6:25 PM Page 16
