4 Polk Audio Custom Install Pr
oduct: LC265
i -IP
, LC80
i -IP
LC265i-IP/LC80i-IP Specifications (continued)
Connections
W
ire Recommendations
Network Line
Shielded Cat5e or Cat6 cable with RJ-45 connectors. Wiring term-
ination convention should be the same at both ends of the cable.
COMM Line
Shielded Cat5e or Cat6 cable with RJ-45 connectors. Wiring term-
ination convention should be the same at both ends of the cable.
Analog Line
Low capacitance multi-stranded RCA shielded cable, or
speaker wire with speaker-level-to-line-level transformer
(such as the PAC
SNI-35).
USB Connection
USB 1.1, 5-wire, USB to mini-USB cable.
Power Lines
These recommendations are for all connections from the
power supply to each speaker. 14/4 is recommended for
all applications. If this is not possible, refer to this chart:
Wire length Wire gauge/
# of Conductors
<50’ 16/2
50-100’ 16/4
>100’ 14/4
Network Decoder Card
See Owner’s Manual for installation instructions
Amplifier Connections
LCi-IP speakers are designed for use with analog and digital systems.
The speakers per
form equally well in either mode, though the digital
mode of
fers gr
eater contr
ol functionality
. Speaker
-level-to-line-level
adapters are available for legacy analog systems wher
e speaker wir
e
is already run, allowing connection to RCA input of the speaker.
Recommended Configuration
LCi-IP Performance Optimization Wizard
SM
Program
Polk Audio provides the Performance Optimization Wizard
SM
on CD-ROM. This program enables you to optimize the perform-
ance characteristics of Polk Audio LCi-IP speakers specifically to
their location in a given room and to the physical characteristics
of that room. You can also download the Performance
Optimization Wizard from our website
(www.polkaudio.com/downloads/po-wizard.exe ).
Walking Through the Room Optimization Choices
• This program can be used for installing and setting up in-wall or
in-ceiling LCi-IP speakers and asks basic configuration and room
environment questions (figure1).
Figure 1
Depending on the speaker you’re installing, its location and the
r
oom, you may be asked for a series of measur
ements, including the
height of the listening room’s ceiling, distances from walls, ceiling
and floor to the speaker(s), as well as ver
tical and horizontal angles
of speakers r
elative to the listening ar
ea. Y
ou may also be asked to
provide measurements for the height, width, depth and center of the
listening ar
ea (see the LC
i-IP Owner’
s Manual for more).
Factory Support
For pr
oduct suppor
t visit our website at www
.polkaudio.com
or Polk Audio Customer Service: 1-800-377-7655 (Outside US &
Canada: 410-358-3600) Monday-Friday
, 9:00 AM-6:00 PM EST
,
polkcs@polkaudio.com
For more information on the LC
i-265IP and LCi-80IP log onto
http://www.polkaudio.com/downloads/manuals/home/
LCi-265IP LCi-80IP_Manual.pdf.
RCA
COMM
Network In
Eur
ostyle
(Phoenix)
Power In
T
weeter
