![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/1/89/189cf982-b6dd-4868-9e49-0c385ac04960/189cf982-b6dd-4868-9e49-0c385ac04960-bg5.png)
Downward Firing Dimensions
DSWPRO400: 13 3/4" W x 13 3/4" D x 14 5/8" H
(34.9cmWx34.9cmDx37.2cmH)
DSWPRO500: 15 1/2" W x 15 1/2" D x 16 1/8" H
(39.4cm Wx 39.4cm Dx 41.0cmH)
DSW
PRO600:16 1/2" W x 16 1/2" D x 17 1/8" H
(41.9cm Wx 41.9cm Dx 43.5cmH)
Forward Firing Dimensions
(height with rubber foot inserts)
DSWPRO400: 13 3/4" W x 13" D x 15 7/8" H
(34.9cmWx33.0cmDx40.3cmH
DSW
PRO500:15 1/2" W x 14 1/2" D x 17 5/8" H
(39.4cm Wx 36.8cm Dx 44.8cmH
DSWPRO600: 16 1/2" W x 15 1/2" D x 18 5/8" H
(41.9cm Wx 39.4cm Dx 47.3cmH
Note: Optional grille adds to depth (sold seperately).
AC POWER CONNECTION AND AUTO ON/OFF
Dual Voltage Switch
DSWPRO Series subwoofers are equipped with either a dual
voltage switch or an auto sensor.
DSWPRO400 Auto Sense
DSWPRO500 Selectable
DSWPRO600 Selectable
WARNING: The correct voltage for your country has been set
at the factory. Only use the voltage setting specified for your
country. Using an improper setting may damage your subwoofer.
Main Power Switch
Turn power on/off via the AC MAIN switch.
Standby/Auto/On Switch
Your DSW
PRO Series subwoofer uses a 3-position power switch, which selects
your subwoofer’s operational mode. The three modes are: Standby, Auto and On.
Standby
With the switch in this position, the subwoofer will only turn on (become active)
when the user presses the power button on the remote control. Once active the
subwoofer will remain on regardless of whether an audio signal is present.
Auto
In the “Auto” position, your subwoofer automatically turns on when it senses
an audio signal and the LED located on the back of the subwoofer will be green.
We recommend the “Auto” mode if your subwoofer is always receiving
power (i.e., if it's plugged into a wall outlet). When no signal is present, the sub-
woofer will enter a “waiting” state after 15 minutes and the LED will turn yellow.
On
The subwoofer is always on and fully active in this mode. The LED on the back
of the subwoofer will be green. This mode is best if the subwoofer is plugged
into a switched power outlet. The remote control cannot be used to turn off
the subwoofer.
Note: You may want to leave your subwoofer unplugged or the AC MAIN
switch turned off during extended periods of non use, such as during a vacation.
Power Mode LED Colors and Their Meaning:
Green: Fully active
Yellow: Standby
Red: Protection
H
W
D
Customer Service Hours of Operation: Monday-Friday, 9AM-6PM EST polkcs@polkaudio.com 5
H
W
D