A SERVICE OF

logo

4.4.3 Set command
From the main menu screen (see Figure 4-3), input “set” and press enter. The set command list screen in Figure 4-17
appears.
Figure
Set port [n]: Please refer to chapter 4.4.3.1
4-17 Set command list screen
This set command list contains ten items:
.
Set vlan [n]: Please refer to chapter 4.4.3.2
.
Set flowcontrol [n] enable/disable: Please refer to chapter 4.4.3.3
.
Set vlantag [n] enable/disable: Please refer to chapter 4.4.3.4
Set vlanaware [n] enable/disable: Please refer to chapter 4.4.3.5
Set priority [n] [m]: Please refer to chapter 4.4.3.6
Set pvid [n] [m]: Please refer to chapter 4.4.3.7
Set vid [n] [m]: Please refer to chapter 4.4.3.8
Set ip xxx.xxx.xxx.xxx.mmm.mmm.mmm.mmm.ggg.ggg.ggg.ggg: Please refer to chapter 4.4.3.9
Set pass [oldpass] [newpass]: Please refer to chapter 4.4.3.10
EM-GSW2416SFv1 - 22 -