English
15
● Press and hold ECO POWER/STANDBY
ON 2 for 3 seconds or more to go back to
Eco Power Standby mode.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Volume control
Adjust VOLUME -/+ (VOL + / -) to increase
or decrease the volume level.
➜ Display shows the volume level "VOL" and a
number from 1-31. “MIN” denotes the minimum
volume level and “MAX” denotes the maximum
volume level.
To switch off the volume temporarily
● Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" is displayed.
● To restore the volume, press MUTE again or
increase/decrease the volume level.
Sound control
DSC and DBB effects cannot be used together.
● Press DSC repeatedly to select the desired
sound effect : POP, JAZZ, CLASSIC or ROCK.
● Press DBB to switch on or off the bass
enhancement.
➜ If the DBB is activated, DBB is shown.
➜ If the DBB is deactivated, DBB disappears.
Displaying the clock
● During playback, press CLOCK on the remote
control to display clock.
Basic Functions
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching on/off the set and
selecting functions
1 To switch on, press STANDBY-ON/ ECO
POWER or SOURCE on the set.
➜ The set switches to the last source selected.
➜ On the remote control, press the source
button (e.g. DAB, FM, DISC, USB, AUX).
2 When the set is on, press STANDBY-ON/
ECO POWER to switch off (or y on the
remote control).
3 To select your function, press SOURCE once
or more on the set (or DAB, FM, DISC, USB,
AUX on the remote control).
Switching the system to Eco
Power Standby mode
● Press ECO POWER/STANDBY ON 2 in
the active mode.
➜ The backlight of clock display is dim in
standby.
● The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
● To view the clock time in Standby mode, press
and hold ECO POWER/STANDBY ON 2
for 3 seconds or more.
➜ The system enters the normal standby mode
with clock display.
pg 001-029_MCB395_05-04 2008.5.2, 17:3215
