>
RGBS
1 Connect an optional Scart/RCA Component Video adapter (1) to the Scart connector of
your Component- or HDTV-video equipment.
2 Connect an optional VGA/RCA Component Video cable (2) to the Data socket of the
projector.
3 Connect the plugs at the other end of the cable to the appropriate output sockets of your
Component- or HDTV-video equipment (R,G, B, S).
• If required you can connect the Audio out L/R sockets of the Component- or HDTV-video
equipment to the Audio (in) L/R sockets of the projector.
For this, use an optional audio connection cable (3).
– Audio information from the Component- or HDTV-video equipment will be played via the
projector speaker.
When RGBsog connection has been made:
1 Press Menu.
– The menu bar appears on the screen.
The ‘Picture’ item is highlighted.
2 Use Cursor Control left to select ‘Set up’.
3 Use Cursor Control down to select ‘Auto Component Selection’.
4 Use Cursor Control right to select ‘RGBsog’.
Scart connection
Philips Multimedia Projector 19 English User guide bClever SV1
4. Installation Connecting to video equipment
Component/HDTV
equipment
R
Audio
out
L
DVD player, Settop Box,
HDTV receiver, etc.
3
2
1
FILTER
MULTIMEDIA S-VIDEO VIDEO AUDIO-L
AUDIO-R
