English
21
Clock/Timer
➜ The clock digits for the minutes flash.
8 Press TUNING 4 ¢ (or ¡ / ™) to set the
minutes.
9 Press TIMER again and then press TUNING
4 ¢ (or ¡ / ™) to select the desired sound
source: CD, USB, TUNER, or DAB.
0 Press TIMER again.
➜ For CD, USB or DAB mode, "VOLUME XX"
appears.
➜ For Tuner mode, "P XX" appears, where P
stands for the preset number. Press TUNING
4 ¢ (or ¡ / ™) to select the desired radio
station. Then press TIMER again, "VOLUME XX"
appears.
! Press TUNING 4 ¢ (or ¡ / ™) to set the
volume level.
" Press TIMER again to confirm the time.
➜ The timer is now set and activated.
Notes:
– If no volume level or preset number is selected,
default is preset to 12 and 01 respectively.
Activating and deactivating
TIMER
In standby or during playback, press TIMER
once.
➜ Display shows if activated, and disappears if
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
● Press SLEEP on the remote control once or
more.
➜ Display shows and one of the sleep time
options in sequence: SLEEP 0FF, 120, 90,
60, 45, 30,15, 05, SLEEP 0FF...
● To deactivate, press SLEEP on the remote
control once or more until “SLEEP 0FF“
is
shown, or press ECO POWER STANDBY-ON
on the system (or 2on the remote control).
➜ disappears from the display.
Setting the clock
1 In standby or active mode, press CLOCK on
the remote control.
➜ The clock digits for the hours flash.
2 Press TUNING 4 ¢ (or ¡ / ™ on the
remote control) to set the hours.
3 Press CLOCK again.
➜ The clock digits for the minutes flash.
4 Press TUNING 4 ¢ (or ¡ / ™ on the
remote control) to set the minutes.
5 Press CLOCK to confirm the time.
Setting the timer
The system can be used as an alarm clock,
whereby the CD, USB, TUNER, or DAB is
switched on at a set time. The clock time needs
to be set first before the timer can be used.
1 In standby or active mode, press and hold
TIMER on the remote control.
➜ "ON" appears and the hour digits for the
start timer starts flashing.
2 Press TUNING 4 ¢ (or ¡ / ™ on the
remote control) to set the hours.
3 Press TIMER again.
➜ The clock digits for the minutes flash.
4 Press TUNING 4 ¢ (or ¡ / ™ ) to set
the minutes.
5 Press TIMER again.
➜ "OFF" appears and the hour digits for the end
timer starts flashing.
6 Press TUNING 4 ¢ (or ¡ / ™ ) to set
the hours.
7 Press TIMER again.
MCB204_05-Eng 4/18/07, 9:45 AM21
