9
HOW TO USE THE SOUND ADJUSTMENT CONTROLS
T
o adjust your TV sound controls, select a channel and
follow these steps.
1
Press the
MENU
button on the remote control
to show the onscreen menu. Picture will be high-
lighted.
2
Press the CURSOR DOWN button to highlight
Sound.
3
Press the CURSOR RIGHT button to enter the
sound menu.
4
Press the CURSOR UP or CURSOR DOWN
button to select the sound adjustment you want
to change: Equalizer, Balance, AVL, Dolby
Virtual, SAP, or Sound.
5
Press the CURSOR LEFT or CURSOR
RIGHT button to adjust the selected control.
6
Press the STATUS/EXIT button when finished
to remove the menu from the screen.
Equalizer – adjusts the sound tones. Select
120Hz to 10KHz.
Balance – adjusts the level of sound coming
from the left and right speakers.
AV L (Auto Volume Leveler) - when On, AVL
will level out the sound being heard when sud-
den changes in volume occur during commer-
cial breaks or channel changes.
Dolby Virtual - adds greater depth and dimen-
sion to TV sound. Select from Dolby Virtual
or Stereo sound (if Stereo) or Spatial or Mono
(if Mono).
SAP (Secondary Audio Programming)– sent
as a third audio channel, a SAP signal can be
heard apart from the current TV program
sound. Note: If SAP is not available, “Not
Available” will appear on the screen.
Sound – select from Stereo or Mono.
HELPFUL HINT
