Pelco Manual C350M-H (10/99) 3
IMPORTANT SAFEGUARDS AND WARNINGS
Prior to installation and use of this product, the following WARNINGS should be observed.
1. Installation and servicing should only be done by qualified service personnel and con-
form to all local codes.
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclo-
sure, it is designed for indoor use only and it must not be installed where exposed to
rain and moisture.
3. The camera and lens combined weight shall not exceed 15 pounds (7 kg).
4. Only use replacement parts recommended by Pelco.
5. After replacement/repair of this unit’s electrical components, conduct a resistance
measurement between line and exposed parts to verify the exposed parts have not
been connected to line circuitry.
6. Use only installation methods and materials capable of supporting four times the com-
bined weight of the enclosure, scanner, camera and lens.
The product and/or manual may bear the following marks:
Please thoroughly familiarize yourself with the information in this manual prior to installation
and operation.
This symbol indicates that dangerous volt-
age constituting a risk of electric shock is
present within this unit.
This symbol indicates that there are impor-
tant operating and maintenance instructions
in the literature accompanying this unit.
CAUTION:
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
DESCRIPTION
The PS7 and PS7-24 “mini” scanners are light-duty indoor scanning units designed to oper-
ate with a maximum load of 15 pounds (7 kg.).
The PS7 is a 120 VAC continuous-duty scanner. The PS7-24 is a 24 VAC scanner capable
of either automatic or manual operation when used with a remote control unit or continuous-
duty operation when voltage is supplied directly to the scanner. External limit stops allow for
pan rotation up to 320 degrees.
MODELS
PS7 Light-duty “mini” scanner, 120 VAC (UL)
PS7-24 Light-duty “mini” scanner, 24 VAC (CE, UL)
INSTALLATION
The following parts are supplied:
1 PS7 Scanner with six-foot cord or
PS7-24 Scanner with eight-foot cable
1 Adapter plate
3 10-32 mounting screws
3 Internal tooth lock washer
1 Allen hex key
