Creating Custom Wiegand Card Formats
For Intelli-M Supervisor Plus And Intelli-M Web Interface Users
9
-- The “Card Code” is represented as light blue boxes. “Start Bit” within the “Card
Code” area must be assigned. The total number of bits allotted to “Size” for “Card
Code” must also be assigned.
-- If “Parity” masking is to be utilized, then some conversion is required from binary to
hexadecimal. The default 26-bit “Even mask (hex)” is 3FFE000 which when con-
verted to binary is thirteen ones followed by thirteen zeros. The “Odd Mask (hex)” is
thirteen ones.
Note: Parity masking is an option. When trying to conform to a particular manufacturer’s standard, that
manufacturer may need to be consulted for accurate formatting information.
-- The “Bidirectional” option is available for certain types of supported readers. The
“Wiegand Swipe” and “Wiegand Insertion” are two styles of readers that would use
this feature.
-- “Interpret as PIN digit” is required for keypad formats associated as Pin digits.
T
he HID Prox Pro K combination Prox / Keypad reader is an example of a keypad format that
is associated as Pin digits.
