Paxar 9406 Manual

A SERVICE OF

next previous

Setting the Ribbon Option

You can print with or without a ribbon. The default setting for

ribbon is No. If you set the option to No, you must use thermal

direct supplies. To change the setting, follow the steps below.

1. From the Main Menu, press or until you see

MAIN MENU

<Setup>

2. Press . You will see

SETUP

Supply >

3. Press . You will see the first supply option.

SUPPLY

Ribbon >

4. Press to set the ribbon option. You will see the

previous setting, for example

RIBBON

<No

5. Press or until you see the option you want. Then

press . You will see

SUPPLY

Ribbon >

6. Press to exit to the Setup Menu.

NOTE: If you set the Ribbon option to Yes, be sure you

install a ribbon before printing.

The Ribbon

2. The Ribbon

2-11