50
6. Repeat from step 1 to search for another time and date
or press the [TIME & DATE SEARCH] button to cancel
the function. Pressing the [STOP] button will also end
the searching.
Note: Searching may take the recorder 18 seconds at
worst
■ Multi-screen Playback
You can view a multiple playback image displayed in 4-split
or 9-split pattern on the monitor at a time.
• Normal Playback
Press the [PLAY] button to start normal playback. The
image data recorded on the disk are sequentially
played back, and the monitor displays images in the
single display mode or multi-screen display mode.
• Multi-screen Playback
Press the [MULTI SCREEN SELECT] button appropriate
times. The monitor display changes as follows. The
LED’s in the [MULTI SCREEN SELECT] button and
respective input buttons will light up.
Single Image → Quad A (4A/comprising input 1, 2, 3,
and 4) → Quad B (4B/ input 5, 6, 7, and 8) → Nine-spit
(input 1 – 8) → Quad A → Quad B → Nine-split
• Specific Input Playback
Press the respective input button. The images of the
selected input is continuously played back and dis-
played on the monitor.
• STOP Playback
Press the [STOP] button to stop playback.
Note: when the playback proceeds to where recording
is executed on the disk, the recorder will pause
playback and freeze the displayed image on the
monitor.
4. Press the [PLAY] button to play back the searched
record.
5. Press the [STOP] button to stop playback.
Note: “Alarm Search Playback” and “Alarm Log Recall”
are similar, but different in operations. Refer to ■
Alarm Log Recall & Search on page 46.
■ Time & Date Search Playback
A picture record of a specified time and date is played
back.
1. Press the [TIME & DATE SEARCH] button. The LED in
the button lights up. The monitor displays the time &
date search window.
2. Press the [D] or [C] button to move the cursor to the
next position.
3. Rotate the JogDial clockwise to increase the parameter
or counter-clockwise to decrease it.
4. Repeat the steps 2 and 3 above until the desired para-
meters are selected.
5. Press the [PLAY] button to start playback. The monitor
displays the single spot image when an input is select-
ed or nine-split image when all input is specified. The
recorder stops searching when the playback reaches to
the end of the record.
