4
RQT7903
Getting started
To household
mains socket
4
Connect the AC mains lead.
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD
ON PAGE 3 BEFORE CONNECTION.
• The included AC mains lead is for use with this unit only. Do
not use it with other equipment.
Insertion of connector
Connector
Approx. 3.5 mm
Even when the connector is perfectly inserted, depending
on the type of inlet used, the front part of the connector
may jut out as shown in the drawing. However there is no
problem using the unit.
Appliance inlet
AM loop antenna
2
Connect the AM loop antenna.
Optional antenna connectionO
F
•
•
•
•
Step 2
- Inserting batteries into the remote control
Step 3
- DEMO function
1
Connect the FM indoor antenna.
Adhesive
tape
FM indoor
antenna
Tape the antenna to a wall or column, in a position with
least amount of interference.
3
Connect the speaker cables.
Cords with white and blue tags are for high frequency.
Cords with red and black tags are for low frequency.
Incorrect connection can damage the unit.
Red
Black
White
Blue
Grey (+)
Blue (–)
Black (–)
Red (+)
Stand the antenna up on its base. Keep loose antenna
cord away from other wires and cords.
Step Step 11
- Making the connections - Making the connections
Connect the AC mains lead only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the speaker cords.
OR
If the speaker cords do not have vinyl tips, directly connect them to the terminals.
Untitled-1 4Untitled-1 4 3/18/05 10:19:51 AM3/18/05 10:19:51 AM
