24
When you connect a cassette tape recorder or MD recorder to record the broadcasting, confirm the following:
■ Notice about Recorder Connections
Howling can occur depending on the connection form or connected devices. Connect the recording devices either of the fol-
lowing ways:
● When Using a Recording-only and a
Playback-only Decks
The unit 's REC OUT will be used for the recording output
line.
• Connect the unit's REC OUT with the recording deck's
REC IN.
• Connect the unit' s STEREO INPUT or MULTI INPUT ST
jacks with the playback deck's stereo output connector.
● When Recording and Playing Back
with One Deck
The unit' s SUB OUTPUT jack will be used for the recording
output line.
•Set the DIP switch of the assigned input line to ON.
• Connect the unit' s SUB OUTPUT and the recorder's
recording output connector with a recommended type
of cable. (Refer to p. 13 for details on cable informa-
tion.)
• Connect the unit' s STEREO INPUT, MULTI INPUT ST or
LINE IN jack(s) and the output connector of the play-
back deck.
Note: This connection implements monaural recording, as stereo input signals are mono mixed to be output through SUB
OUTPUT jack.
■ Using a Recording-only and a Playback-only Decks
A recording-only and a playback-only decks are used.
1. Connect the playback-only deck to the STEREO INPUT 1 to 4 jacks or the MULTI INPUT ST jack.
2. Connect the recording-only deck to the REC OUT jack.
RECORDER CONNECTIONS
Ser No.
No. 1: GND
No. 2: HOT
No. 3: COLD
the cassette tape or MD.
OUTPUT jack.
playback deck.
Mono recording is OK.
back with one deck.
playback deck.
