A SERVICE OF

logo

Open as PDF
next previous
80 51-3849, 5/26/06
APPENDIX
TORQUE SPECS.
Foot-pounds may be converted to Newton Meters by multiplying by 1.35582
Foot-pounds may be converted to Inch-pounds by multiplying by 12.
If the nut and screw are not the same grade, the lower grade will always be used.
NOTE - Nylock nuts are utilized when greater resistance to vibrating loose is required, and greater operating temperatures are
not a factor. In addition, like lock nuts, nylock nuts have a safety feature that if the bolt does vibrate loose, the nut will
remain on the screw. Install nylock nuts to the standard torque shown above.