PREPARATION FOR USE
I IIL_IHmgH _l _ IIKU | [$h
If you want to change the language of the on-screen menu, follow the procedure below.
Connect the power cord to a standard AC outlet.
Press the POWER button to turn on the TV.
Press the MENU button so that the menu display appears
on the TV screen,
O5
Press the CH(annel) • or • button to point to "[ENGLISH]".
Select "ENGLISH" or "ESPAlqOL" = Spanish by using
the VOLiume) • or • button,
Press the MENU button to exit the menu.
• PICTURE
CHANNEL SET
V-CHIP SET UP
CAPTION [OFF I
[ENGLISN]ESPANOL
PICTURE l
CHANNEL SET
V CHIP SET UP
CAPTION [OFFJ
• [ENGLrSHIESPANOL
[1111|lk_l_ DIl U[t D[,_IH IllII I_1
To preset a channel or to change a preset channel, follow the procedure below.
Press the POWER button to turn on the TV
Press the MENU button so that the menu display appears
on the TV screen.
Press the CH(annel) • or • button to point to "CHANNEL SET".
Then. press the VOL(ume) • button.
• PICTURE ]
CHANNEL SET
V-CHIP SET UP
CAPTION [OFF]
[ [ENGLISH]ESPAI_IOL J
I PICTURE
• CHANNEL SET
V-CHIP SET UP
CAPTION {OFF]
IENGLISH]ESPA_IOL
Press the CH(annel) • or • button to point to "AUTO MEMO".
Then. press the VOL(ume) • button.
The tuner scans and memorizes all aclive channels in
your area.
• The TV distinguishes between standard TV channels
and cable channels.
• When AUTO MEMO action is completed, the lowest
memorized channel reappears on the screen.
• When you press the CH(annel) • or • button after
selecting AUTO MEMO, the tuner will stop at the memorized
channels only.
[ADD/DELETE FUNCTION]
I) Press the MENU button so that the menu display appears on the TV
SCTeen.
2) Press the CH(annel) • or • button to point to "CHANNEL SET".
Then. press the VOL(ume) • button.
3) Press the VOL(ume) • button so that "ADD/DELETE" is selected.
4) Use the CH(annel) • or • button to select the
channel you wish to put into memory or to erase from memory.
Note: The display will return to the screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
• Press the VOL(ume) • or • button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
• Press the VOL(ume) • or • button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5)Press the MENU button to exit the menu.
ADO/DELETE
AUTO MEMO
PICTURE
• CHANNEL SET
V CHIP SET 0P
CAPTION IOFF1
[ENGLISHIESPANOL
• ADO/CELETg
AUTO MEMO
