TD530XA/601XB 01-36 02.8.26 11:44 AM Page 19
TV OPERATION
rur,_ o___he TViDVID, VHS
Press the POWER button to turn on the
TV/DVD/VHS.
2 S÷lleot 1be oha,'_eH i_u_,'_ber
Press the CHANNEL • or • button to select your
desired channel number or press the number buttons
on the remote control.
Remember: If the TV/DVD/VHS is connected to a
cable box or satellite box, the TV/DVD/VHS must be
on CH3 or CH4, then the channel to be viewed must
be selected on the cable box or satellite box.
3 Adi_st o_'_d
Press the VOLUME A or V button
to adjust the volume.
NOTES:
• If you press the CHANNEL A or Vin the DVD
mode, you can change the TV channels.
Even if you turn off the TV/DVD/VHS in the DVD
mode, when you turn it on again, it will go into the
TV/VCR mode.
The TV/DVD/VHS's picture controls BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS
are preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:
• Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
• When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
• TV/DVD/VHS power must be turned on.
SeHect PI!O1AR CONTROL"
Press the PICTURE button on the remote control.
2 $eHec_ i_em you wat'_/,o _@._s
Press flae Arrow • or • button until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
TINT ................
SHARPNESS
Adiu _<_li_epicture_ott_rd
Press the Arrow I_ or _1 button to adjust to your
desired level.
Arrow _1 Arrow I_
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
• If there is a power failure of any kind, the unit will
retain its memory for this feature.
- 19 - EN
IC29
