33
Programming
Network Services Number
• Press and hold PROGRAM key
during Standby.
•
Press
“5”
to select network
services number programming.
(The LCD displays the current
number if available; otherwise a
blank screen will be displayed.)
•
Press
PROGRAM
key to select
service number programming.
(The current number flashes.)
• Press CLEAR key to erase the
digit of the current number one by
one. Press and hold CLEAR key
to erase the entire number.
• Enter new numbers.
• Press PROGRAM key to confirm
the editing.
• Press CLEAR key to exit.
34
Programming
Service Centre Number
• Press and hold PROGRAM key
during Standby.
•
Press
“6”
to select service centre
number programming.
(The LCD displays the current
number if it has been
programmed; otherwise, a blank
screen shall be displayed )
• Press PROGRAM key to select
service centre number
programming.
(The current number flashes.)
• Press
CLEAR
key to erase the
digit of the current number one by
one. Press and hold
CLEAR
key
to erase the entire number.
• Enter new numbers.
•
Press
PROGRAM
key to confirm
the editing.
• Press CLEAR key to exit.
