8
On CD / MP3 / WMA / USB-DRIV / MEM-CARD Mode
lPreset 1- press this button to pause the disc / file played.
lPreset 2- press this button to scan the first 10 seconds of all the tracks on the selected disc / USB drive /
SD or MMC Card.
lPreset 3- press this button to repeat the current track of the disc / USB drive / SD or MMC Card.
lPreset 4- press this button to play disc / USB drive / SD or MMC Card at random order - disc/file shuffle play.
lPreset 5- press this button to search -10 track (for MP3 / WMA / USB-DRIV / MEM-CARD Mode only).
lPreset 6- press this button to search +10 track (for MP3 / WMA / USB-DRIV / MEM-CARD Mode only).
NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving
station frequency will be stored in the button pressed. After this, the memorized station can be recalled by
pressing the button once.
18. USB PORT
The unit is ready to play MP3/WMA songs on an external USB device through the USB port directly on
the front panel.
19. SD/MMC CARD SLOT
Holding the SD or MMC card and insert into the slot until you hear the lock sound (Figure 1). The unit will
automatically engage into MEM-CARD play mode. If you want to eject the SD or MMC card, just press the
card inward (Figure 2) until you hear the unlock sound and then release the SD or MMC card (Figure 3).
20. BUILT-IN MICROPHONE
21. RESET BUTTON
The RESET button is located on the front of control panel. It is recessed in order to prevent accidental
engagement, and can be activated with the tip of a ball-point pen or any similar pointed object. This reset
circuitry is provided in order to protect the unit's microprocessor, and should only be activated under the
following conditions :
a) Initial installation after all wiring is completed.
b) Abnormal operation is encountered such as numerical indication on display is erratic.
c) Whenever the reset button is activated, all preset memory content will be erased and must be
reprogrammed.
*USB PORT*
Compatible with
