29
Chapter4PowerSavingFunctions
4-5. Shifting to the power saving mode when a person
leaves the monitor “EcoView Sense”
The sensor on the front side of the monitor detects the movement of a person by using the EcoView Sense
function. When a person moves away from the monitor, it shifts to the power saving mode automatically and
does not display the images on the screen to reduce the power consumption. When a person comes near the
monitor again, it comes back from the power saving mode and displays the images. The detection level of the
EcoView Sense sensor can be changed according to the environment of usage.
Note
• At the time of shifting to Power Saving mode, the icon that indicates shifting is displayed.
To set EcoView Sense On/Off
1. Press
.
The “EcoView” menu appears.
2. Choose “EcoView Sense” with or . (Alternatively, you can use to select it.)
3. Select “On” or “Off” with
or .
4. Press
to exit the adjustment.
Note
• When the orientation of the Adjustment menu is set to “Portrait”, the EcoView Sense is turned off (See “3-6. Setting
Orientation <Orientation>” (page 24)). Change the setting to on.
To change the detection level
Level Detectable Range Details
Auto
(defaultsetting)
Automaticsetting
(120cmorless)
Thedetectablerangeisdenedbytheperson’smovement.
Whenyougetoutoftherange,themonitorshiftstothe
powersavingmode.Sincethefunctiondetermineswhether
theobjectismovingornot,themonitorcanshifttothe
powersavingmodeevenifthereisachairorwallinthe
detectablerange.
Manual1 Automaticsetting(90
cmorless)
Manual2 120cmorless Whenyougetoutofthedetectablerange,themonitorshifts
tothepowersavingmode.Thissettingisrecommended
ifthemonitorfrequentlyshiftstothepowersavingmode
whenthelevelis“Auto”or“Manual1”eventhoughyouare
infrontofthemonitor.
Manual3 90cmorless
1.
Choose <PowerManager> from the Adjustment menu, and press
.
2.
Choose <EcoView Sense> from the <PowerManager> menu, and press
.
The <EcoView Sense> menu appears.
3. Select “Auto” or “Manual” with or .
When selecting “Manual”, select 1, 2 or 3 for the detection level of the sensor with or .
4. Press to exit the adjustment.
