36
Chapter 6 Reference
●
To set input signal selection [Input Selection]
The monitor recognizes the connector through which PC signals are input.
Priority setting Function
Auto When a PC is turned off or enters the powersaving mode, the monitor
automatically displays another signal.
Manual The monitor detects only the PC’s signals currently displaying automatically.
Select an active input signal with
.
Procedure
1. Choose <Tools> from the Adjustment menu, and press .
2. Choose <Input Selection> from the <Tools> menu, and press .
The <Input Selection> menu appears.
3. Select “Auto” or “Manual” with or .
4. Press to exit the adjustment.
Attention
• When “Auto” is selected for <Input Selection>, the monitor’s power-saving function works only when the all PCs
are in the power-saving mode.
