A SERVICE OF

logo

Open as PDF
next previous
Faults in the water intake or water drain
Problem Possible fault Solution
The In-operation
indicator is flashing
quickly.
The buzzer is
sounding.
One of the following
messages appears in
the display:
2 Open water supply
The water tap is closed. Open the water tap all the
way.
2 Water intake
Before fixing the fault:
– Turn the commercial
dishwasher off with the -
button.
There is a problem with
the water intake.
– Open the water tap all the
way.
– Check the water inlet filter
and clean it if necessary
(see "Maintenance").
– The water pressure at the
water connection is less
than 30 kPa (4.4 psi).
Consult a plumber.
Problem solving guide
53