^
Turn the programme selector back to
the programme which needs to be
changed. The actual value appears
in the display after °C.
^
Press 4 or hold it in, until the
required value appears in the display.
^
Final rinse temperature holding
time:
Turn the programme selector to the
STOP position f
(the programming level is only
displayed in this switch position).
^
Press 3 again, E06 for
programming level 6 will appear in
the display. Then:
^ Turn the programme selector back to
the programme which needs to be
changed. The actual value appears
in the display after min.
^ Press 4 until the required value
appears in the display.
^ Having changed a value or all
values:
^
Press 6. SP appears.
^
Press 6 again. The change has
been recorded.
Programming special functions
37
