To clean the underside of the filter, the
flap must be opened:
^ Pull back the yellow clip to do this.
^ Rinse all parts under running water,
using a nylon brush if necessary.
^ Then close the flap so that the clip
engages. Important: After cleaning
make sure that the clip has properly
engaged.
^
Replace the filter combination so that
it lies flat in the base of the wash
cabinet.
^ Secure the filter by turning the handle
in a clockwise direction.
,
Take care when you are fitting
the filter combination that it is
secured in position correctly.
Otherwise coarse soil could get into
the circulation system and cause a
blockage.
Cleaning and care
39
