Cleaning and care
Cleaning the spray arms
Particles of food can lodge in the spray
arm jets.
The spray arms should be inspected
and cleaned regularly (approx. every 6
months).
To do this remove the spray arms as fol-
lows.
Lift up the middle spray arm b to en-
gage the tooth-wheel mechanism.
Then unscrew the spray arm
c.
Remove the lower basket and take
out the
lower spray arm.
Dishwashers with cutlery basket:
Unscrew the upper spray arm.
Dishwashers with cutlery tray:
Pull out the cutlery tray.
Lift up the upper spray arm to en-
gage the tooth-wheel mechanism
and then unscrew the spray arm.
Using a sharp pointed object push
the food particles into the spray arm
jets and rinse well under running
water.
Please note:
After replacing the spray arms check
that they move freely.
Cleaning and care
43
